- The knowledge about type A and type B tube light 2016-04-27
- How to install LED Tube ----installation of led tube and wiring instr...2016-03-29
- You Should Know These! The Newest LED Tubes Standard2016-03-19
- The common certification of LED lamp2016-03-01
- 10 methods tell you how to choose dim LED lamps2016-02-27
- The knowledge of led panel light2016-01-12
Sign up for our newsletter to
get the latest updates and
The common certification of LED lamp
LED is energy saving product, no matter LED package or LED lighting products. If it didn’t approval any certificate it will have a bad effect.
“CCC” is the abbreviation of “China Compulsory Certification”, which is in the Peoples’ Republic of China more commonly known as “3C Certification” or “3C Certificate”. It is a systematic, independent product certification systems served to offer more legal certainty as well as freedom of trade and commerce.
The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity". CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives. By affixing the CE marking to a product, a manufacturer declares that the product meets all the legal requirements for CE marking and can be sold throughout the EEA. This also applies to products made in other countries that are sold in the EEA.
CB Scheme (IEC product qualification testing and certification of IEC system) is the IECEE operation - international system, IECEE certification bodies of member states to IEC standards-based products for electrical safety testing, the test results that the CB and CB test report test certificate in IECEE Member States to be mutual recognition system. Purpose is to reduce the need to meet different national certification or approval criteria arising from international trade barriers. The International Electrotechnical Commission IEC IECEE Conformity Testing and certification organization for short.
The GS mark proves that your product has been evaluated, tested and certified for electrical safety by an independent accredited third-party. Because of its high consumer recognition and credibility on the German market and in other European countries, manufacturers implementing the trusted GS mark reap long-term benefits.
VDE Testing and Certification Institute located at Offenbach in Germany is a research institute which belongs to Verband Deutscher Elektrotechniker (referred to as VDE) founded in 1920. As a neutral and independent body, VDE laboratory will test and certify electrical products based on the application, according to German VDE standards or European EN standards, or International Electrotechnical Commission (IEC) standards. VDE directly involves in the development of German national standards, for European most experienced certification body in the world which enjoy a high reputation in the world. It annually completes 18,000 certification programs for nearly 2,200 German companies and 2,700 foreign companies. So far, there are nearly 200,000 electrical products in 50 countries which are granted by VDE mark. In many countries, VDE certification mark is more famous than local certification mark, which are in particular recognized and valued by importers and exporters.
CSA Certification (Canadian Standards Association) is referred to that the product safety is accredited by Canadian Standards Association and the product is granted by the CSA mark. Products can enter Canadian market after they are affixed by CSA mark. Due to the intercommunity of North American market, in recent years, CSA has a tendency to form the mutual accreditation with UL certification.
PSE, Product Safety of Electrical Appliance & Materials certification, is called as “Compatibility Test” in Japan. It refers to the mandatory market entry system for Japan’s electrical equipments and is an important content of Safety Laws for Electrical Equipmens. The mandatory date of PSE is April 1, 2001 and PSE mark is the Safety mark of Japan’s products.
ENERGY STAR products are independently certified to save energy without sacrificing features or functionality. Saving energy helps prevent climate change. Look for the ENERGY STAR label to save money on your energy bills and help protect our environment.
SAA Approvals is accredited by the Joint Accreditation Service of Australia and New Zealand (JAS-ANZ) as a third party certification body to issue of Certificates of Approval for declared and non-declared electrical equipmentthat has proven to comply with the safety requirements of the applicable Australian Standard. SAA is using IEC system standard.
Hong Kong HK Certification
The lamp holder, electric wire and electric plug has approved VED/SEMKO/TQM certificate, the product test report must according the EN60598 standard and signed the Declaration of Conformity. The rate voltage AC220V 50Hz, BS standard plug.
The JIS which stands for Japanese Industrial Standards is enacted and examined by Japanese Industrial Standards Committee (JISC). In Japanese building industry, only those products which have passed JIS authentication can be qualified for the access. Japanese certification is classified 5 grades, J, R, M, H and S, with grade S having the highest requirement.
South African Bureau of Standards (SABS) is established based on the “National Standards Act” issued in 1945, and is a subsidiary body of South African Department of Trade and Industry. SABS is a neutral third party certification body in South Africa which is responsible for South African system certification and product certification. In addition to the responsibility of developing standards, SABS also on behalf of the Country manages the mandatory standards, grants the operation right of mark to conformance products, is responsible for issuing ISO9001 and ISO9002 certificates to conformance companies, conducts the pre-shipment test and inspection on behalf of the Country and some main purchasers, and issues the conformity certificate. SABS certification is widely used in chemicals, biological products, fiber products and clothing, machinery products, safety equipment, electrical products, civil engineering and construction and automotive products and other fields. In recent years, SABS certification has become the important measure of South Africa Government to control the import.
Using IED60598 system, the location standard is BS: Rate voltage: AC240v 50Hz; can use B15, B22 lamp holder.
RoHS, short for Restriction of Hazardous Substances, is specific to the European Union. The law revolves revolves the handling of hazardous materials, ranging from the manufacturing to the disposal of the material. While created inside of Europe for members of the European Union, other regions around the world have utilized and created offshoots of the RoHS. This includes nations throughout Asia (China, Japan and South Korea) and versions of it inside of North America as well. Manufacturers of hazardous material must become RoHS compliant in order to sell and distribute the product inside of the European Union, which is exactly why it is so vital for a company to obtain these credentials.