Now the Position: Home > Products > ETL Listed LED Tube > body
9W 2ft LED Tube ETL cETL Listed

9W 2ft LED Tube ETL cETL Listed

  • Model Number:
  • SYH-X08M-006F PLE
  • Power:
  • 9W
  • Size:
  • D26*600mm
  • Input Voltage:
  • AC100-277V
  • Material:
  • Aluminum+PC
  • Color Temperature:
  • 4000-4500K

9W 2ft LED Tube ETL cETL Listed

General Introduction

9W 2ft LED Tube ETL cETL Listed

Ellipse design 9W 2ft LED Tube is ETL cETL listed. ETL LED tube is for dry and damp indoor lighting application. Adopting SMD LED2835 as light source and working with input voltage AC100-277V, 9W 2ft LED tube ETL replaces for 18W-20W fluorescent lamp.

ETL LED Tube Details Photos

etl led tube smd led2835

etl led tube built-in led driver

etl led tube frosted cover

etl led tube aluminum metal housing

etl led tube ellipse end caps

etl led tube wires

ETL LED Tube Key Features

9W 2ft LED Tube ETL cETL Listed ellipse design

25-27lm Single SMD LED2835 4000-4500K

ETL LED tube with built-in LED driver efficacy of 88%

Frosted plastic diffuser V0 optical lense, 0.8mm thickness

0.81mm thickness aluminum metal housing for heat sink

LED Tube Lights Application

ETL LED tube lights can be applied in indoor lighting application: school, office, meeting room, factory, supermarket,etc.

led tube application

ETL Listed LED Tube Parameters

Model NO.


Optical Parameters

Light Source


Luminous Flux(lm)






Beam Angle


Light Attenuation ratio (%)

Less than 10% within 3 years

LED Quantity


Electrical Parameters

Input Voltage(V)




Output Voltage(V)


Total Power(W)


Power Factor


Lifespan (Hrs)


Dielectric Voltage Withstand Test


Structural Parameters


Aluminum housing &PC cover





Net Weight(g)


Integrated Parameters

Operating Temperature


Storage Humidity


Safety Requirement


Environmental Directives


ETL Listed LED Tube Installation

ETL Listed LED Tube Wiring Diagram:

ETL Listed LED T8 Tube Wiring Diagram

Installation Instructions
1)Turn off the electricity supply before installation .
2)For refitting old fluorescent lamp with a single-side-power-input LED tube, please re-connect your wire as the following diagram.

ETL Listed LED T8 Tube Wiring Installation

3)For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.

Note: You can just keep magnetic ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to remove it if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2.

LED Tube Light Package

LED Tube light Package

Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for around 5 years, Syhdee has already won trust and favor from customers at home and abroad.

Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached 1500000 pieces of LED tube lights per month.

R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team

Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.

Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.


Please note that the model number of our LED tubes featuring rotating end caps is not marked suffix as RO on the certificates. Here is used to distinguish rotatable and non-rotatable end caps.

Send us a message
My status