Now the Position: Home > Products > T8 Integrated LED Tube Light > body
Integrated T8 LED Tube 4ft 19W LED Lights

Integrated T8 LED Tube 4ft 19W LED Lights

  • Model Number:
  • SYH-T08-012-100C-IN-F01
  • Power:
  • 19W
  • Size:
  • Ф26×1200MM
  • Input Voltage:
  • AC100-240V
  • Material:
  • Alloy Aluminum housing & PC Cover
  • Color Temperature:
  • 6000-6500K

Integrated T8 LED Tube 4ft 19W LED Lights

General Introduction

This high Lumen Integrated T8 LED Tube uses SMD LED2835 as light source and there are 300mm(1feet), 600mm(2 feet), 900mm(3 feet), 1200mm(4 feet) available.With longer lifespan(>50,000hours), higher brightness and less toxic substance, integrated T8 LED tube can be widely used to replace the traditional fluorescent tube lights. This type of integrated T8 LED tube 4ft 19w LED lights adopts the light and fixture integration standard socket and works with AC100-240V voltage input and DC72-80V voltage output. It is also RoHS compliant.

Integrated T8 LED Tube Details Photo

Integrated T8 LED Tube smd led2835

Integrated T8 LED Tube c.c. led driver

Integrated T8 LED Tube aluminum alloyed housing

Integrated T8 LED Tube end caps

Integrated T8 LED Tube wires

Integrated T8 LED Tube Features

Integrated T8 LED tube 4ft 19W LED lights designed with integrated fixture and lamp

Single LEDs of 24-26lumen per watt with higher brightness and wider luminous area

Non-isolated power supply of 88% power conversion efficiency

Milky lenses PC cover of 0.85-0.88 light transmittance

Glass fiber PCB board for excellent insulation

Integrated T8 LED Tube Application

Integrated T8 LED tube can be applied in indoor LED lighting, places as factory, supermarket, school, office, etc.

Integrated T8 LED Tube application

Integrated T8 LED Tube Parameters

Model NO.


Optical Parameters

Light Source


Luminous Flux(lm)






Beam Angle


Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity


Electrical Parameters

Input Voltage(V)




Output Voltage(V)


Total Power(W)


Power Factor


Lifespan (Hrs)


Dielectric Voltage Withstand Test


Structural Parameters


Aluminum housing &PC cover





Net Weight(g)


Integrated Parameters

Operating Temperature


Storage Humidity


Safety Requirement


Environmental Directives


Integrated T8 LED Tube Installation

Integrated T8 LED Tube Wiring Diagram:

Integrated T8 LED Tube wiring diagram

1) Turn off electric power before LED Tube Lights installation

2) For refitting old fluorescent lamp with a single-side-power-input LED tube, please re-connect your wire as the following diagram.

Integrated T8 LED Tube installation diagram

3) For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.

Note: You can just keep magnetic ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to remove it if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2.

Integrated T8 LED Tube Package

Integrated T8 LED Tube package

Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for more than 5 years, Syhdee has already won trust and favor from customers at home and abroad.

Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 270 skilled workers, our production capability has reached 400K pieces of LED tube lights per month.

R&D Strength

Professional R&D team to guarantee the stable performance of products:

² Chip & Packaging Team

² Illuminating Efficiency Team

² Electrical Engineering Team

² Electronic Engineering Team

² Hardware Structure Team

² Industrial Design Team

Product Quality

² Reliable LED chip suppliers Samsung, Epistar and Sanan

² Safe isolated power supply

² Mitsubishi Optical grade PC cover to reduce light failure and improve heat dissipation

² Phosphor from Mitsubishi, Hung Ta or Intematix

² Complied with TUV, UL, SAA, C-Tick, CE, RoHS, FCC, PSE directives, etc.

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.

LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.


Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.

Send us a message
My status