Now the Position: Home > Products > PSE Certificated LED Tube > body
PSE LED Tube 2ft 580mm 10w LED Lighting

PSE LED Tube 2ft 580mm 10w LED Lighting

  • Model Number:
  • SYH-T08-006-072C-G05
  • Power:
  • 10W
  • Size:
  • D26*580MM
  • Input Voltage:
  • AC85-265V
  • Material:
  • Alloy Aluminum housing & PC Cover
  • Color Temperature:
  • 6000-6500K

PSE LED Tube 2ft 580mm 10w LED Lighting

General Introduction

This PSE Certificated LEDTube uses SMD LED2835 LED as light source and there are 600mm(2 feet), 900mm(3 feet), 1200mm(4 feet), 1500mm(5 feet)available. It is featured by oval-shaped end caps and milky PC cover. This type of PSE Certificated LED Tube adopts AC100-240V voltage input and DC36-42V output. It is PSE and RoHS approved.

LED Tube Details Photo

japanese led tube lights pse certification smd led2835

japanese led tube lights pse certificate isolated power supply

japanese led tube lights pse certification milky PC cover

japanese led tube lights pse certification oval-shape alloyed aluminum housing

japanese led tube lights pse certification beveled end caps

japanese led tube lights pse certification insulated electrical wires

PSE LED Tube Features

580mm special size for Japan PSE led tube lights designed with oval-shaped beveled end caps.

Isolated power supply with 250mA current input and output.

Glass fiber PCB board for excellent insulation.

Anodic oxidation to protect aluminum surface from corrosion and scratch.

International Standard lamp accessories: connectors, clips, screws, power casing, etc.

More than 80% energy saving.

No UV, no mercury, no IR radiation, Eco-friendly.

LED Tube Application

PSE LED tube lights can be applied in indoor lighting and outdoor lighting, places such as office, factory, park lot, metro, etc.

LED tube application

PSE LED Tube Size

pse led tube size




Size A

Size B





PSE LED Tube Parameters

Model NO.


Optical Parameters

Light Source


Luminous Flux(lm)






Beam Angle


Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity


Electrical Parameters

Input Voltage(V)




Output Voltage(V)


Total Power(W)


Power Factor


Lifespan (Hrs)


Dielectric Voltage Withstand Test


Structural Parameters


Aluminum housing &PC cover





Net Weight(g)


Integrated Parameters

Operating Temperature


Storage Humidity


Safety Requirement


Environmental Directives


PSE LED Tube Installation

PSE LED Tube Wiring Diagram:

pse led tube wiring diagram

1) Please turn off electric power before LED Tube Lights installation

2) For refitting old fluorescent lamp, with a two-side-power-input LED tube, please re-connect your wire as the following diagram

pse led tube wiring installation

3) For diagram A1 loop with inductive ballast & starter, after removing the starter, LED tube can be installed directly into the G13 base. Then LED tube light is ready to work. And the loop has been changed from A1 to A2.

Note: You can just keep the inductive ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to cut it out if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast , please remove the electronic ballast first. Then connect L and N to the two sockets of the G13 base separately. Now your LED tube light is ready to be turned on. And the loop has been changed into the one showed in diagram B2.

PSE LED Tube Package

LED tube package

Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in production, R&D, design and sales on various types of LED tubes only for around 5 years, Syhdee has already won trust and favor from customers at home and abroad. Syhdee LED tubes were widely applied in lighting retrofit replacement project, commercial lighting, industry lighting, office lighting, architecture lighting, etc.

Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached up to 1500000 pieces of LED tube lights per month.

R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team

Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System


Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives,etc.

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.

LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.

Send us a message
My status