Now the Position: Home > Products > PSE Certificated LED Tube > body
LED Tube T8 G13 24W 6000-6500K with PSE

LED Tube T8 G13 24W 6000-6500K with PSE

  • Model Number:
  • SYH-T08-012-144C-G04
  • Power:
  • 24W
  • Size:
  • D26*600MM
  • Input Voltage:
  • AC100-240V
  • Material:
  • Alloy Aluminum housing & PC Cover
  • Color Temperature:
  • 6000-6500K

LED Tube T8 G13 24W 6000-6500K with PSE

General Introduction

This high Lumen T8 LED Tube uses SMD LED2835 as light source and there are 600mm(2 feet), 900mm(3 feet), 1200mm(4 feet), 1500mm

(5 feet) and 2400mm(8 feet) available. With longer lifespan(>50,000hours), higher brightness and less toxic substance, T8 LED tube can be

widely used to replace the traditional fluorescent tube lights. 24w 4ft led tube adopts the standard G13 socket and can work with AC100-240V

voltage input and DC36-42V output. It is PSE approved.

T8 LED Tube Details Photo

t8 led tube smd led2835

t8 led tube isolated power supply

t8 led tube milky pc cover

t8 led tube alloyed aluminum housing

t8 led tube oval-shape end caps

t8 led tube wires

T8 LED Tube Features

T8 LED tube 22w 4ft light tube featured by oval-shape beveled end caps

Single LEDs of 24-26lumen per watt with higher brightness

Isolated power supply with 86% conversion efficiency

Frosted PC cover of 0.85-0.88 light transimittance

Anodic techniques to protect aluminum housing surface from corrosion

T8 LED Tube Application

T8 LED tube can be applied in indoor LED lighting, places as hotel, school, office, supermarket, factory, etc.

t8 led tube application

T8 Light Tube Parameters

Model NO.


Optical Parameters

Light Source


Luminous Flux(lm)






Beam Angle


Light Attenuation ratio (%)

Less than 10% within 3 years

LED Quantity


Electrical Parameters

Input Voltage(V)




Output Voltage(V)


Total Power(W)


Power Factor


Lifespan (Hrs)


Dielectric Voltage Withstand Test


Structural Parameters


Aluminum housing &PC cover





Net Weight(g)


Integrated Parameters

Operating Temperature


Storage Humidity


Safety Requirement


Environmental Directives


T8 Light Tube Installation

T8 Light Tube Wiring Diagram:

t8 light tube wiring diagram

1) Please turn off electric power before LED Tube Lights installation

2) For refitting old fluorescent lamp, with a two-side-power-input LED tube, please re-connect your wire as the following diagram

t8 light tube wiring installation

3) For diagram A1 loop with inductive ballast & starter, after removing the starter, LED tube can be installed directly into the G13 base. Then LED tube light is ready to work. And the loop has been changed from A1 to A2.

Note: You can just keep the inductive ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to cut it out if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast , please remove the electronic ballast first. Then connect L and N to the two sockets of the G13 base separately. Now your LED tube light is ready to be turned on. And the loop has been changed into the one showed in diagram B2.

T8 Light Tube Package

t8 light tube package

Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for around 5 years, Syhdee has already won trust and favor from customers at home and abroad.

Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 270 skilled workers, our production capability has reached 400K pieces of LED tube lights per month.

R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team

Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile, good relations with material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.

LED Tube OEM&ODM Project

As one professional LED tube supplier inChina, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.


Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.

Send us a message
My status