Now the Position: Home > Products > UL Certificated Approved > body
Tube LED T8 18W 4ft Tube Lights UL Classified

Tube LED T8 18W 4ft Tube Lights UL Classified

  • Model Number:
  • SYH-M08-012
  • Power:
  • 18W
  • Size:
  • D26*1200
  • Input Voltage:
  • AC120-277V
  • Material:
  • Alloyed Aluminum Housing&PC Cover
  • Color Temperature:
  • 6000-6500K

Tube LED T8 18W 4ft Tube Lights UL Listed

General Introduction

Tube LED T8 adopts SMD LED3528 as light source and there are 600mm(2ft), 1200mm(4ft), 1500mm(5ft) and 2400mm(8ft) in dimension available. With longer lifespan and less toxic substance, this 18W 4ft tube lights can be used to replace traditional fluorescent lamps. This type tube LED T8 adopts standard G13 socket and works with AC120-277V voltage input and DC36-42V voltage output. It is UL and RoHS qualified.

Tube LED T8 Details Photos

Tube LED T8 SMD LED3528Tube LED T8 Isolated power supply ul qualifiedTube LED T8 Frosted PC cover Tube LED T8 Aluminum alloyed housingTube LED T8 beveled end capsTube LED T8 wires

Tube LED T8 Features

18w 4ft tube lights T8 LED tube with beveled end caps design

Single LED of 8-9lumen with 5 years warranty

Isolated power supply 470mA constant electrical current

Conversion efficiency of 86%, PF>0.92

Frosted PC cover of 0.85-0.88 light transmittance

Anodic oxidation techniques to protect alloyed aluminum housing from scratch

NO UV, no mercury, no IR, eco-friendly.

Tube LED T8 Application

T8 tube lights can be applied in indoor lighting places, as hotel, supermarket, office, meeting room, factory, etc.

T8 tube lights application

Tube LED T8 Size

Tube LED T8 Dimension














Tube LED T8 Parameters

Model NO.


Optical Parameters

Light Source


Luminous Flux(lm)






Beam Angle


Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity


Electrical Parameters

Input Voltage(V)




Output Voltage(V)


Total Power(W)


Power Factor


Lifespan (Hrs)


Dielectric Voltage Withstand Test


Structural Parameters


Aluminum housing &PC cover





Net Weight(g)


Integrated Parameters

Operating Temperature


Storage Humidity


Safety Requirement

UL qualified

Environmental Directives


Tube Lights Installation

Tube LED T8 Wiring Diagram:

Tube LED T8 Wiring Diagram

1) Turn off electric power before LED Tube T8 installation

2) For refitting old fluorescent lamp with a single-side-power-input LED tube T8, please re-connect your wire as the following diagram.

Tube LED T8 Installation

3) For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.

Note: You can just keep magnetic ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to remove it if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2.

Tube Lights Package

Tube Lights Package

Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in production, R&D, design and sales on various types of LED tubes only for around 5 years, Syhdee has already won trust and favor from customers at home and abroad. Syhdee LED tubes were widely applied in lighting retrofit replacement project, commercial lighting, industry lighting, office lighting, architecture lighting, etc.

Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached up to 1500000 pieces of LED tube lights per month.

R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team

Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.

LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.

Send us a message
My status