Now the Position: Home > Products > UL Certificated Approved > body
T8 LED Tube 10W 2ft Tube Light with UL Certification

T8 LED Tube 10W 2ft Tube Light with UL Certification

  • Model Number:
  • SYH-M08-006
  • Power:
  • 10W
  • Size:
  • D26*600MM
  • Input Voltage:
  • AC120-277V
  • Material:
  • Alloyed Aluminum housing & PC Cover
  • Color Temperature:
  • 4000K-4500K


T8 LED Tube 10W 2ft Tube Light with UL Certification

General Introduction

This high Lumen 10W UL T8 LED Tube Light uses SMD LED3528 as source and there are 600mm(2 feet), 1200mm(4 feet), 1500mm(5 feet) and 2400mm(8feet) available.With longer lifespan(>50,000hours), higher brightness and less toxic substance, it can be widely used to replace the traditional fluorescent tube lights. This type of 10W 2ft Tube Light adopts the standard G13 socket and works with AC120-277V. It is UL and RoHS certificated.

T8 LED Tube Details Photo

T8 LED Tube SMD LED3528

T8 LED Tube ul Certified Isolated Power

T8 LED Tube frosted lenses PC cover

T8 LED Tube inside buckled aluminum housing

T8 LED Tube End Caps

T8 LED Tube Insulated Wires

T8 LED Tube Features

T8 LED Tube 10W 2ft Tube Light with UL Certification featured by beveled end caps

Single LEDs light source of 8-9lumen with 5 years warranty

Isolated power supply with 230 mA constant electrical current input

Inside buckled frosted lens with 0.85-0.88 light emitting rate

Anodic alloyed aluminum housing to protect surface from scratch

T8 LED Tube Application

LED Tube can be applied in indoor LED lighting places, as office, meeting room, school, supermarket, etc.

T8 LED Tube Application

T8 LED Tube Parameters

Model NO.


Optical Parameters

Light Source


Luminous Flux(lm)






Beam Angle


Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity


Electrical Parameters

Input Voltage(V)




Output Voltage(V)


Total Power(W)


Power Factor


Lifespan (Hrs)


Dielectric Voltage Withstand Test


Structural Parameters


Aluminum housing &PC cover





Net Weight(g)


Integrated Parameters

Operating Temperature


Storage Humidity


Safety Requirement


Environmental Directives


T8 LED Tube Installation

LED Tube Light Wiring Diagram:

T8 LED Tube Wiring Diagram

Installation Instructions
1)Turn off the electricity supply before installation .
2)For refitting old fluorescent lamp with a single-side-power-input LED tube, please re-connect your wire as the following diagram.

T8 LED Tube Wiring Installation

3)For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.

Note: You can just keep magnetic ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to remove it if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2.

T8 LED Tube Package

T8 LED Tube Package

Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for over 5 years,Syhdee has already won trust and favor from customers at home and abroad.

Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached 1500000 pieces of LED tube lights per month.

R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team

Product Quality

Reliable LED chip suppliers —Samsung, Epistar and Sanan

Mitsubishi Optical grade PC cover to reduce light failure and improve heat dissipation

Phosphor from Mitsubishi, Hung Ta or Intematix

Complied with VDE, TUV, UL, SAA, C-Tick, CE, RoHS, FCC, PSE directives, etc.

Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.

LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.

Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.

Send us a message
My status