Now the Position: Home > Products > UL Certificated Approved > body
 UL Classified LED Tube 4ft 18W LED T8  Tube

UL Classified LED Tube 4ft 18W LED T8 Tube

  • Model Number:
  • SYH-T08-012-2
  • Power:
  • 18W
  • Size:
  • D26*1200MM
  • Input Voltage:
  • AC120-277V
  • Material:
  • Alloy Aluminum housing & PC Cover
  • Color Temperature:
  • 5000K-5500K

SIMILAR PRODUCT

 UL Listed LED Tube 4ft 18W LED T8  Tube



General Introduction

This high Lumen UL classified LED tube uses SMD 2835LED as light source and there are 600mm(2 feet), 1200mm(4 feet), 1500mm(5 feet) available.With longer lifespan(>50,000hours), higher brightness and less toxic substance, it can be widely used to replace the traditional fluorescent tube lights. This type of UL Listed LED Tube adopts the standard G13 socket and work with AC120-277V.




LED Tube Details Photo

UL listed LED Tube SMD LED2835

UL Listed LED Tube isolated power supply

UL Listed LED Tube clear PC cover

UL Listed LED Tube alloyed aluminum housing

UL listed LED Tube end caps

UL listed LED Tube insulated wires





LED Tube Features

UL classified LED Tube 4ft 18w LED T8 Tube featured by beveled end caps

Single LEDs light source of 24-26lumen with 3 years warranty

Isolated power supply 460 mA constant electrical current input

Inside buckled Clear PC cover with 0.9-0.95 light emitting rate

Anodic alloyed aluminum housing to protect surface from scratch





LED Tube Application

LED Tube can be applied in indoor LED lighting places, as office, meeting room, school, supermarket, etc.

LED Tube Application






LED T8 Tube Parameters

Model NO.

SYH-T08-012-2

Optical Parameters

Light Source

SMD LED2835

Luminous Flux(lm)

1800

CCT(K)

5000-5500

CRI(Ra)

70

Beam Angle

120°-160°

Light Attenuation ratio (%)

Less than 10% within 3 years

LED Quantity

144

Electrical Parameters

Input Voltage(V)

AC120-277V

Frequency(Hz)

50/60HZ

Output Voltage(V)

DC36-42V

Total Power(W)

18

Power Factor

>0.9

Lifespan (Hrs)

>50,000

Dielectric Voltage Withstand Test

1500Vac/60s

Structural Parameters

Material

Aluminum housing &PC cover

Size(mm)

D26*1200

Length(mm)

1200

Net Weight(g)

400

Integrated Parameters

Operating Temperature

-10°-40°

Storage Humidity

-40°-85°

Safety Requirement

UL

Environmental Directives

RoHS



LED T8 Tube Installation

LED Tube Light Wiring Diagram:

LED T8 Tube Wiring Diagram

Installation Instructions

1)Turn off the electricity supply before installation .
2)For refitting old fluorescent lamp with a single-side-power-input LED tube, please re-connect your wire as the following diagram.

LED T8 Tube Wiring Installation

3)For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.


Note: You can just keep magnetic ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to remove it if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2.





LED Tube Package

LED T8 Tube Package




Syhdee LED Tube

Syhdee LED Tube

Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for more than 5 years, Syhdee has already won trust and favor from customers at home and abroad.


Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached 1500000 pieces of LED tube lights per month.


R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team


Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.


Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.


LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.


Warning
Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.

Send us a message
My status