Now the Position: Home > Products > All Plastic LED Tube Lights > body
 All Plastic T8 Tube 19W 4ft LED Tube Lights

All Plastic T8 Tube 19W 4ft LED Tube Lights

  • Model Number:
  • SYH-T08-012-100C-F27
  • Power:
  • 19W
  • Size:
  • D26*1200MM
  • Input Voltage:
  • AC100-240V
  • Material:
  • ALL PC
  • Color Temperature:
  • 4000-4500K

All Plastic T8 Tube 19W 4ft LED Tube Lights

General Introduction

This Economic T8 Tube uses SMD LED2835 as light source and there are 600mm(2 feet), 1200mm(4 feet), 1500mm(5 feet)available. It is made up of all plastic materials. This type of 4ft LED tube lights adopts AC100-240V voltage input and DC72-80V output. It is EMC and RoHS approved.


All Plastic T8 Tube Details Photo

All Plastic T8 Tube 19W 4ft LED Tube Lights smd led2835

All Plastic T8 Tube 19W 4ft LED Tube Lights isolated power supply

All Plastic T8 Tube 19W 4ft LED Tube Lights frosted pc cover

All Plastic T8 Tube 19W 4ft LED Tube Lights aluminum shell

All Plastic T8 Tube 19W 4ft LED Tube Lights round end caps

All Plastic T8 Tube 19W 4ft LED Tube Lights wires

All Plastic T8 Tube Features

4ft 1200mm Economic T8 Tube all PC body lamp with king-size end caps design.

Non-isolated power supply input positioned in two ends .

Built-in Aluminum to ensure good electrical conductivity.

Anodic oxidation technique to protect aluminum surface from corrosion and scratch.

International Standard lamp accessories: connectors, clips, screws, power casing, Mylar, etc.

More than 80% energy saving.

No UV, no mercury, no IR radiation, Eco-friendly.


All Plastic T8 Tube Application

All Plastic T8 Tube can be applied in residential lighting, office lighting, hotel lighting, factory lighting, etc.

led tube indoor illumination


All Plastic T8 Tube Size

All Plastic T8 Tube size

A

C

-----

Minimum

Maximum

Minimum

Maximum

Caps

1197mm

1198mm

1213mm

1214mm

12.7mm



All Plastic T8 Tube Parameters

Model NO.

SYH-T08-012-100C-F27

Optical Parameters

Light Source

SMD LED2835

Luminous Flux(lm)

1650

CCT(K)

4000-4500

CRI(Ra)

80

Beam Angle

120°-160°

Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity

100

Electrical Parameters

Input Voltage(V)

AC100-240V

Frequency(Hz)

50/60HZ

Output Voltage(V)

DC72-80V

Total Power(W)

19

Power Factor

>0.9

Lifespan (Hrs)

>50,000

Dielectric Voltage Withstand Test

3750Vac/60s

Structural Parameters

Material

Aluminum housing &PC cover

Size(mm)

Φ26×1200

Length(mm)

1200

Net Weight(g)

320

Integrated Parameters

Operating Temperature

-10°-40°

Storage Humidity

-40°-85°

Safety Requirement

EMC

Environmental Directives

RoHS


T8 LED Tube Lights Installation

All Plastic T8 Tube Wiring Diagram:

All Plastic T8 Tube wiring diagram

1) Please turn off electric power before LED Tube Lights installation

2) For refitting old fluorescent lamp, with a two-side-power-input LED tube, please re-connect your wire as the following diagram.

All Plastic T8 Tube installation diagram


3) For diagram A1 loop with inductive ballast & starter, after removing the starter, LED tube can be installed directly into the G13 base. Then LED tube light is ready to work. And the loop has been changed from A1 to A2.

Note: You can just keep the inductive ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to cut it out if your labor cost is not so high.

4) For diagram B1 loop with electronic ballast , please remove the electronic ballast first. Then connect L and N to the two sockets of the G13 base separately. Now your LED tube light is ready to be turned on. And the loop has been changed into the one showed in diagram B2.


T8 LED Tube Lights Package

led tube packing way

Concentrated on LED Tubes

Specialized in production, R&D, design and sales on various types of LED tubes only for more than 5 years, Syhdee has already won trust and favor from customers at home and abroad. Syhdee LED tubes were widely applied in lighting retrofit replacement project, commercial lighting, industry lighting, office lighting, architecture lighting, etc.


Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached up to 1500000 pieces of LED tube lights per month.


R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team


Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.


Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.


LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.

Send us a message
My status