Now the Position: Home > 栏目不存在
T8 To T5 Conversion LED Tube Light 4ft 18W T8 body G5 Bi Pins

T8 To T5 Conversion LED Tube Light 4ft 18W T8 body G5 Bi Pins

  • Model Number:
  • SYH-T08-012-100C-TR-F02
  • Power:
  • 18W
  • Size:
  • Ф26×1200MM
  • Input Voltage:
  • AC100-240V
  • Material:
  • Alloy Aluminum housing & PC Cover
  • Color Temperature:
  • 4000-4500K

SIMILAR PRODUCT


General Introduction

New structure designT8 to T5 conversion led tube light uses SMD LED2835 as light source and there are 600mm(2 feet), 900mm(3 feet),

1200mm (4 feet), 1500mm (5 feet) available.With longer lifespan (>50,000hours), higher brightness and less toxic substance, t8 to t5

conversion LED tube light can be widely used to replace the traditional T5 fluorescent tube lights. This tube lights is fixed on standard

g5 base while lamp body T8 is able to produce wide beam angle. It works with AC100-240V voltage input and DC72-80V voltage output.



T8 To T5 Conversion LED Tube Light Details Photo

t8 t0 t5 conversion led tube light smd led2835

t8 to t5 conversion led tube light non-isolated power supply

t8 to t5 conversion led tube light milky pc cover

t8 to t5 conversion led tube light alloyed aluminum housing

t8 to t5 conversion led tube light end caps

t8 to t5 conversion led tube light wires



T8 To T5 Conversion LED Tube Light Features

T8 to T5 conversion led tube light with G5 pins and T8 lamp body

Single LEDs of 23-25lumen, 4000-4500K

G5 bi pins to fix on standard T5 socket

Non-isolated LED driver, power conversion efficiency 88%

PC lens( milky, clear available), high light transmittance





T8 To T5 Conversion LED Tube Light Application

LED tube light can be applied in indoor LED lighting, places as office, factory, school, etc.

led tube light application





T8 To T5 Conversion LED Tube Light Size

t8 body g5 pins led tube light size

A

B

_

Size A

Size B

Caps


1148



1162



G5






T8 To T5 Conversion LED Tube Light Parameters

Model NO.

SYH-T08-012-100C-TR-F02

Optical Parameters

Light Source

SMD LED2835

Luminous Flux(lm)

1650

CCT(K)

4000-4500K

CRI(Ra)

80

Beam Angle

120°-160°

Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity

100

Electrical Parameters

Input Voltage(V)

AC100-240V

Frequency(Hz)

50/60HZ

Output Voltage(V)

DC72-80V

Total Power(W)

18

Power Factor

0.9

Lifespan (Hrs)

>50,000

Dielectric Voltage Withstand Test

3750Vac/60s

Structural Parameters

Material

Aluminum housing &PC cover

Size(mm)

Φ26×1200

Length(mm)

1200

Net Weight(g)

320

Integrated Parameters

Operating Temperature

-10°-40°

Storage Humidity

-40°-85°

Safety Requirement

/

Environmental Directives

RoHS





T8 To T5 Conversion LED Tube Light Installation

LED Tube Light Wiring Diagram:

t8 body g5 pins led tube wiring diagram


1) Please turn off electric power before LED Tube Lights installation

2) For refitting old fluorescent lamp, with a two-side-power-input LED tube, please re-connect your wire as the following diagram

t8 body g5 pins led tube light installation diagram


3) For diagram A1 loop with inductive ballast & starter, after removing the starter, LED tube can be installed directly into the G13 base. Then LED tube light is ready to work. And the loop has been changed from A1 to A2.



Note: You can just keep the inductive ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to cut it out if your labor cost is not so high.



4) For diagram B1 loop with electronic ballast , please remove the electronic ballast first. Then connect L and N to the two sockets of the G13 base separately. Now your LED tube light is ready to be turned on. And the loop has been changed into the one showed in diagram B2.






T8 To T5 Conversion LED Tube Light Package

led tube packing way



Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for more than 5 years, we have already won trust and favor from customers at home and abroad.


Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over520 skilled workers, our production capability has reached 1500000 pieces of LED tube lights per month.


R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team


Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.


Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.


LED Tube OEM&ODM Project

As one professional LED tube supplier inChina, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.

Send us a message
My status