Now the Position: Home > 栏目不存在
Design G5 pins T8 lamp body 13W 4ft LED Tube

Design G5 pins T8 lamp body 13W 4ft LED Tube

  • Model Number:
  • SYH-T08-012-100C-TR-F05
  • Power:
  • 13W
  • Size:
  • Ф26×1200MM
  • Input Voltage:
  • AC100-240V
  • Material:
  • Alloy Aluminum housing & PC Cover
  • Color Temperature:
  • 6000-6500K

SIMILAR PRODUCT


General Introduction

This high Lumen Design G5 pins T8 LED lamp body LED tube uses SMD LED2835 as light source and there are 600mm(2 feet), 900mm(3 feet), 1200mm(4 feet), 1500mm(5 feet) available.With longer lifespan(>50,000hours), higher brightness and less toxic substance, it can be widely used to replace the traditional fluorescent tube lights. This type of Design G5 pins T8 LED lamp body LED Tube adopts the standard G5 socket and works with AC100-240V voltage input and DC72-80V voltage output. It is RoHS approved.




LED Tube Details Photo

g5 pins t8 body led tube smd led2835

g5 pins t8 body led tube non-isolated power supply

g5 pins t8 body led tube milky pc cover

g5 pins t8 body led tube alloyed aluminum housing

g5 pins t8 body led tube end caps

g5 pins t8 body led tube wires



LED Tube Features

Design G5 pins T8 lamp body 13w 4ft LED tube to replace traditional T5 fluorescent tube

Single LEDs of 22-24 lumen per watt higher brightness

Non-isolated power supply of 88% power conversion efficiency

Milky PC cover of 85-88% light transmittance

PC cover outside buckled alloyed aluminum housing

Anodic techniques to protect aluminum housing from corrosion




LED Tube Application

G5 pin T8 lamp body LED tube can be applied in indoor LED lighting, places as office, school, meeting room, etc.

led tube application





LED Tube Size

g5 pins t8 body led tube size

A

B

_

Size A

Size B

Caps


1148



1162



G5







LED Tube Parameters

Model NO.

SYH-T08-012-100C-TR-F05

Optical Parameters

Light Source

SMD LED2835

Luminous Flux(lm)

1250


CCT(K)

6000-6500

CRI(Ra)

70

Beam Angle

120°-160°

Light Attenuation ratio (%)

Less than 10% in 3 years

LED Quantity

100

Electrical Parameters

Input Voltage(V)

AC100-240V

Frequency(Hz)

50/60HZ

Output Voltage(V)

DC72-80V

Total Power(W)

13

Power Factor

>0.9

Lifespan (Hrs)

>50,000

Dielectric Voltage Withstand Test

3750Vac/60s

Structural Parameters

Material

Aluminum housing &PC cover

Size(mm)

Φ26×1200

Length(mm)

1200

Net Weight(g)

320

Integrated Parameters

Operating Temperature

-10°-40°

Storage Humidity

-40°-85°

Safety Requirement

/

Environmental Directives

RoHS




LED Tube Installation

G5 Pins T8 Lamp Body LED Tube Wiring Diagram:

g5 pins t8 body led tube wiring diagram


1) Please turn off electric power before LED Tube Lights installation

2) For refitting old fluorescent lamp, with a two-side-power-input LED tube, please re-connect your wire as the following diagram


g5 pins t8 body led tube installation diagram


3) For diagram A1 loop with inductive ballast & starter, after removing the starter, LED tube can be installed directly into the G13 base. Then LED tube light is ready to work. And the loop has been changed from A1 to A2.



Note: You can just keep the inductive ballast as it was. However, it’ll consumer some power. For saving energy, it’s still suggested to cut it out if your labor cost is not so high.



4) For diagram B1 loop with electronic ballast , please remove the electronic ballast first. Then connect L and N to the two sockets of the G13 base separately. Now your LED tube light is ready to be turned on. And the loop has been changed into the one showed in diagram B2.






LED Tube Package

led tube packing way


Concentrated on LED Tubes

Specialized in producing, researching, and developing all types of LED tubes for more than 5 years, we have already won trust and favor from customers at home and abroad.


Production Capability

With a 30,000 square meter workshop equipped with advanced machines and over 520 skilled workers, our production capability has reached 1500000 pieces of LED tube lights per month.


R&D Strength

Professional R&D team to guarantee the stable performance of products:

Chip & Packaging Team

Illuminating Efficiency Team

Electrical Engineering Team

Electronic Engineering Team

Hardware Structure Team

Industrial Design Team


Product Quality

Syhdee Manufactory has passed Germany TUV Rheinland and DEKRA Quality Management System certification.

Syhdee LED tubes complied with VDE,TUV, UL, FCC, DLC, SAA, C-Tick, CE&RoHS, Erp, PSE directives, etc.


Factory Direct Price

We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.


LED Tube OEM&ODM Project

As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.



Warning

Overall energy efficiency and light distribution of any installation that uses such lamps are determined by the design of the installation.

Send us a message
My status